Showing posts with label Fitzwilliam Auditorium 2. Show all posts
Showing posts with label Fitzwilliam Auditorium 2. Show all posts

Fitzwilliam event - post-production

As the musicians did not require any processing of the material, I only decided to work on two lute and soprano pieces and use them for my portfolio.

First listen

Levels appeared to be OK, but after listening to the material, I discovered a lot of white noise at about -22dB (remember the Data Projector). Luckily, it does not interfere with the music too much, but I will have to gate it out during quiet moments.
The vocalist (Jeni) has a very resonant voice, and when she puts an accent on a note, levels go quite high up. Because she was a bit to the left, one of the microphones was picking up more of her voice, and when she went loud, Marantz (which had a limiter on) limited only one channel for a while. This caused quite funny effect that the vocal is moving around when singing loud - this will have to be eliminated (probably with pan automation)

First corrections

To make the whole record sounding nicer, I put it through my beloved valve EQs and compressors.
Here is what I EQed:
  • Low Frequency cut around 90Hz (mainly for noise).
  • High Frequency Cut from around 11kHz (noise again).
  • Low Shelf raised by a quarter of a knob turn from about 150Hz, to deepen the lute sound and make it sound 'closer'.
  • Cut on band EQ at around 500Hz, Q sharpened just a bit - that's for too resonant vocal frequencies.
  • High Shelf cut down a bit from 6kHz up, Q flattened slightly - this was to reinforce High Cut a bit.


EQ settings - pic 1


EQ settings - pic 2

I used compressors just to increase overall level. High threshold only allowed compression on really loud moments, and even there the compression ratio was quite low.

Compressor settings

After setting the valves up, I recorded the output into the new track.

Recording output from valves

To be honest, I don't really think that I will need to apply any more processing. I will have a second listen later and if it sounds fine, I will just do minor adjustments, fades and burn a CD.

Another Concert in Fitzwilliam

Intro

A week ago, I was asked to record a concert (or rather multimedia performance) happening in Fitzwilliam College Auditorium. The instrumental line-up was:
  • Violin + piano
  • Harpsichord solo
  • Clarinet + piano
  • Vocal (soprano) + lute
  • Viola + piano
Equipment used

I wanted to use the Handy H4 recorder that I used with Music Therapy Group for the backup track, but it was unavailable in the studios, so I had to settle with good old Marantz.
Remembering the noise problems I had with C414s, I decided to take some small diaphragm microphones this time. To make setting the stereo pair easier, I just took NT4 with me. Marantz was set up to record in 16 bits, 44.100 kHz.

Set-up

I put the microphone(s) in front of the first row of the audience. This allowed me to access this place easily. During the rehearsal, I took notes on the levels and microphone placement (instruments were in different places around the stage). Later on, I had to play DVDs and change lights during the performance, so I couldn't sit down with my recording equipment, but I had time to get there in in between musical parts to change settings on Marantz and position microphones, according to the notes I took during the rehearsal.
Because of the movies in between music, the data projector which is hanging down right above the stage had to be on. That contributed to the noise in the record.

Pics

(click the image to go to flickr, where you can see larger versions)


17/11/2008
Far view of the stage. NT4s are directed towards the musicians.

17/11/2008
Closer view of the stage.

17/11/2008
...And another one.

What next

I'll post more when I get to some studio to have a good listen. For now, that's it!