Showing posts with label Works on Side. Show all posts
Showing posts with label Works on Side. Show all posts

Kette Yard recording - 3rd and 4th sessions

Session 1


Intro


I forgot to check my notes from the last session, so I came to the studio not knowing what is left to be done with the 1st track. To avoid doing things against my previous tactics, I decided to start working on the second track.


All changes to all the plug-ins had to be done using automation, to keep the work I did on other tracks intact. What happened in this session was:



Added EQ for strings track
Because the track starts with double bass solo, I automated pan on strings to have them on the middle with a little stereo spread. All the other tracks were muted for the duration of the solo, and I faded them in once they started playing.


EQ on strings track


Adjusted drums volume
In this piece, drums go rather quietly and don't really reach the threshold of the expander that I set up earlier, so I changed its settings a bit.


Put through valves
I tried to worm the sound of this track up a little, so I added some base (low shelf below 200Hz lifted up quite a bit), and decreased low-middle frequencies (wide dip at around 500Hz). As there was already base and high cut applied in Logic, I didn't use them here.

Valve EQ for the whole mix

Then, I sent it to compressor to rise the levels up (primarily I've done it in Logic, but i wanted to have it done by valves). I used 1:10 ratio, but set the threshold so that it would only compress louder bits. I set the attack quick, but release is rather slow, to smoothen the dynamic changes. Gain makeup was adjusted to give peak at around 0dB back in Logic.


Valve compressor for the whole mix




Session 2



That's it for the valves
I had a good, comparative listen to both valve and 'from the box' versions and I realised that for some reason the valves made the recording less clear. It has lost some of the stereo space, and somehow it felt like put through a blender, all mixed and messed up together. Therefore, I decided to not use valves this time.


Starting track 3
This one is quite special, because only guitar and strings play in it. I realised that all the settings from the previous track work pretty well on this one, except for compression settings. Distinction between strings and guitar is much clearer here, and unfortunately when guitar goes loud, compressors would react intensively, creating unpleasant feeling of strings sound being damped.
I couldn't just turn the guitar track down, as strings track contain almost as much of it as of strings themselves and really, varying the guitar track volume didn't quite change anything. To avoid over-compression, I changed the compressor on strings a bit: increased threshold and reduced gain. On the main mix compressor (that I came back to using after deciding on not using valves) I changed attack and release times to make it work less violently.
Additionally, as other microphones were switched off for this piece, I panned strings hard left and right, leaving the guitar a bit to the right.
This all gave pretty clear, dynamically varied effect.


Arrange view showing regions layout and automation on all the tracks.

Fitzwilliam event - post-production

As the musicians did not require any processing of the material, I only decided to work on two lute and soprano pieces and use them for my portfolio.

First listen

Levels appeared to be OK, but after listening to the material, I discovered a lot of white noise at about -22dB (remember the Data Projector). Luckily, it does not interfere with the music too much, but I will have to gate it out during quiet moments.
The vocalist (Jeni) has a very resonant voice, and when she puts an accent on a note, levels go quite high up. Because she was a bit to the left, one of the microphones was picking up more of her voice, and when she went loud, Marantz (which had a limiter on) limited only one channel for a while. This caused quite funny effect that the vocal is moving around when singing loud - this will have to be eliminated (probably with pan automation)

First corrections

To make the whole record sounding nicer, I put it through my beloved valve EQs and compressors.
Here is what I EQed:
  • Low Frequency cut around 90Hz (mainly for noise).
  • High Frequency Cut from around 11kHz (noise again).
  • Low Shelf raised by a quarter of a knob turn from about 150Hz, to deepen the lute sound and make it sound 'closer'.
  • Cut on band EQ at around 500Hz, Q sharpened just a bit - that's for too resonant vocal frequencies.
  • High Shelf cut down a bit from 6kHz up, Q flattened slightly - this was to reinforce High Cut a bit.


EQ settings - pic 1


EQ settings - pic 2

I used compressors just to increase overall level. High threshold only allowed compression on really loud moments, and even there the compression ratio was quite low.

Compressor settings

After setting the valves up, I recorded the output into the new track.

Recording output from valves

To be honest, I don't really think that I will need to apply any more processing. I will have a second listen later and if it sounds fine, I will just do minor adjustments, fades and burn a CD.

After Christmas Break

After long break, time to get back to work.
As Final Studio Practice was cancelled today, I spent some time looking for more concerts to record. I managed to send 3 e-mails: to Cambridge Symphonic Winds, National Youth Jazz Orchestra and Restaurant Alimentum, which hosts weekly Jazz Club.
Also, I got the proposition to record Fitzwilliam College Choir giving a concert together with some other Choir (sorry for imprecise information, but I can't get to my Fitz e-mail from my university network) on the 14th of March. I already agreed and I plan to have this concert as a backup material for the live performance.
Now, I just wait for the replies to come...

Another Concert in Fitzwilliam

Intro

A week ago, I was asked to record a concert (or rather multimedia performance) happening in Fitzwilliam College Auditorium. The instrumental line-up was:
  • Violin + piano
  • Harpsichord solo
  • Clarinet + piano
  • Vocal (soprano) + lute
  • Viola + piano
Equipment used

I wanted to use the Handy H4 recorder that I used with Music Therapy Group for the backup track, but it was unavailable in the studios, so I had to settle with good old Marantz.
Remembering the noise problems I had with C414s, I decided to take some small diaphragm microphones this time. To make setting the stereo pair easier, I just took NT4 with me. Marantz was set up to record in 16 bits, 44.100 kHz.

Set-up

I put the microphone(s) in front of the first row of the audience. This allowed me to access this place easily. During the rehearsal, I took notes on the levels and microphone placement (instruments were in different places around the stage). Later on, I had to play DVDs and change lights during the performance, so I couldn't sit down with my recording equipment, but I had time to get there in in between musical parts to change settings on Marantz and position microphones, according to the notes I took during the rehearsal.
Because of the movies in between music, the data projector which is hanging down right above the stage had to be on. That contributed to the noise in the record.

Pics

(click the image to go to flickr, where you can see larger versions)


17/11/2008
Far view of the stage. NT4s are directed towards the musicians.

17/11/2008
Closer view of the stage.

17/11/2008
...And another one.

What next

I'll post more when I get to some studio to have a good listen. For now, that's it!

Works on side: Kettle yard concert sessions 1 & 2

Intro


At the end of last academic year, I recorded a modern jazz live concert in Kettle Yard here in Cambridge. The work was a part of the assignment for Live Recording Practice for which I required only one piece from the concert, which I processed and handed in. The rest of the material stayed intact though, patiently waiting for me to find some time to work on it - so here we go, I decided to finally have this concert mixed and done.


Short note on the recording


I have already written a lot on this recording (contact me through comments if you'd like to see a logbook), so just shortly:
Band: String quartet, double bass, drums, guitar.
Microphones: NT4 (stereo) hanging from above (later called 'overheads'), 2 AKG C414s behind and above string quartet (you can see one of them on the pic, later called 'strings'), 2 Rhode NTKs above and behind drumkit (later called 'drums'), and AKG D112 (kick drum mic) directed on the guitar's speaker (later called 'guitar').


Click the image to enlarge.
From Karol's AMT 3rd year log


All recorded using Fostex HDD recorder in 24 bits, 48k.

Session 1:

All processors and effects I used and set during this session were tweaked quite roughly and the levels go up above 0 often. I plan to keep them just as guidance for later precise mixing.

Mixer set-up


I sent all paired microphones to buses to be able to apply effects on stereo pairs instead of just applying them to single tracks. This also enabled me to control pan of each track separately. I also created 3 groups for each stereo pair so that I would automatically select 2 tracks in the arrange window.




Sample delays


I started off with close looking at the differences in time between different microphones. I decided to use overheads as a reference for the stereo image, and using sample delays I corrected the position of the remaining microphones so that the sound waves would be exactly in line with the overheads, thus minimalising cancellation and clearing the sound from delays caused by sounds getting to microphones in different moments. Here is how the measured delays looked like - as you can see, the difference in various microphones is quite big. I kept the differences between paired microphones intact (I just delayed two mics using one delay on the bus), as the time differences between left and right channel are important part of the stereo perception.


Sample delays on all tracks

Guitar


The sound from D112 was great. As it was picking up from the guitar amp, the levels were rather flat. To increase difference between background noise when the guitar was quiet and the rest, I used expander. Then, I compressed it with threshold just around peak levels and gained it so that the signal would be much stronger. Attack on both processors is set to 0ms, as I want it to affect as much signal as possible.


Processors applied to gutar track


Overs


These were just compressed. The levels on the recording were not great, so the threshold is quite low, but still it doesn't apply to sounds that are not very loud.


Compressor used on Overheads


Drums


To bring up the drum sounds only, I expanded everything that was louder than -11dB with ratio 0.5:1. Then, instead of compressing again, I just used Adaptive limiter to make sure that the drums will not exceed 0. I adjusted the gain so that the limiter would just affect really loud parts.


Processors used on Drumkit bus


Session 2:

In this session, I started working closely on the first track of the concert (actually, the second one - because of lack of time before the recording, we couldn't set the levels up, so we had to do it during the first track).


Cutting the regions


To avoid unnecessary and unclear mixing of sound from microphones not actually in use, I cut the regions so that when the song starts with strings introduction, only string microphones are used:


Arrange window for the beginning of the first piece


Pan automation


Because only one stereo pair was used at the beginning of this track, I panned in centrally (27 to the left and right). But for later mix, I wanted strings to be on the left, so I automated pan on both lef and right mics to go where I wanted them to go:


Pan automation on strings



Finishing touch


...at least for this session. It took quite a while to work out a way to EQ drums properly. The setting pictured below works quite well - metallic sound has been removed by 7.5dB dip at 2.2kHz. Additional cut at 235Hz elimiated unpleasant vibrations, and thanks to bass cut, I lost most of the noises.




And for now, I think that's it! Here's a bonus pic of the mixer setup: